Ion Drive to the Moon
SMART-1, Europe's first science spacecraft designed to orbit the Moon, has completed the first part of its journey by achieving its initial Earth orbit after a flawless launch during the night of 27/28 September.
|SMART ion engine.
The European Space Agency's SMART-1 was one of three payloads on Ariane Flight 162. The generic Ariane-5 lifted off from the Guiana Space Centre, Europe's spaceport at Kourou, French Guiana, at 2014 hrs local time (2314 hrs GMT) on 27 September (01:14 Central European Summer time on 28 September).
42 minutes after launch, all three satellites had been successfully released into a geostationary transfer orbit (742 x 36 016 km, inclined at 7 degrees to the Equator). While the other two satellites are due to manoeuvre towards geostationary orbit, the 367 kg SMART-1 will begin a much longer journey to a target ten times more distant than the geostationary orbit: the Moon.
Europe can be proud", said ESA Director General Jean-Jacques Dordain, after witnessing the launch from ESA's ESOC space operations centre in Darmstadt, Germany, we have set course for the Moon again. And this is only the beginning: we are preparing to reach much further".
The spacecraft has deployed its solar arrays and is currently undergoing initial checkout of its systems under control from ESA/ESOC. This checkout will continue until 4 October and will include with the initial firing of SMART-1's innovative ion engine.
Science and technology go hand in hand in this exciting mission to the Moon. The Earth and Moon have over 4 thousand million years of shared history, so knowing the Moon better will help scientists in Europe and all over the world to better understand our planet and will give them valuable new hints on how to better safeguard it" said ESA Director of Science David Southwood, following the launch from Kourou.
As the first mission in the new series of Small Missions for Advanced Research in Technology, SMART-1 is mainly designed to demonstrate innovative and key technologies for future deep space science missions.
|Electrical solar energy for SMART probe.
The first technology to be demonstrated on SMART-1 will be Solar Electric Primary Propulsion (SEPP), a highly efficient and lightweight propulsion system that is ideal for long-duration deep space missions in and beyond our solar system. SMART-1's propulsion system consists in a single ion engine fuelled by 82 kg of xenon gas and pure solar energy. This plasma thruster relies on the Hall effect" to accelerate xenon ions to speed up to 16,000 km/hour. It is able to deliver 70 mN of thrust with a specific impulse (the ratio between thrust and propellant consumption) 5 to 10 times better than traditional chemical thrusters and for much longer durations (months or even years, compared to the few minutes' operating times typical of traditional chemical engines).
The ion engine is scheduled to go into action on 30 September. At first, it will fire almost continuously -stopping only when the spacecraft is in the Earth's shadow - to accelerate the probe (at about 0.2 mm/s2) and raise the altitude of its perigee (the lowest point of its orbit) from 750 to 20 000 km. This manoeuvre will take about 80 days to complete and will place the spacecraft safely above the radiation belts that surround the Earth.
Commissioning will be completed within 2 weeks, after which ESA's control centre at ESOC will be in contact with the spacecraft for two 8-hour periods every week.
Once at a safe distance from Earth, SMART-1 will fire its thruster for periods of several days to progressively raise its apogee (the maximum altitude of its orbit) to the orbit of the Moon. At 200 000 km from Earth, it will begin receiving significant tugs from the Moon as it passes by. It will then perform three gravity-assist maneuvers while flying by the Moon in late December 2004, late January and February 2005. Eventually, SMART-1 will be captured" and enter a near-polar elliptical lunar orbit in March 2005. SMART-1 will then use its thruster to reduce the altitude and eccentricity of this orbit.
During this 18-month transfer phase, the solar-electric primary propulsion's performance, and its interactions with the spacecraft and its environment, will be closely monitored by the Spacecraft Potential, Electron & Dust Experiment (SPEDE) and the Electric Propulsion Diagnostic Package (EPDP) to detect possible side-effects or interactions with natural electric and magnetic phenomena in nearby space.
A promising technology, Solar Electric Primary Propulsion could be applied to numerous interplanetary missions in the Solar System, reducing the size and cost of propulsion systems while increasing manoeuvring flexibility and the mass available for scientific instrumentation.
|SMART mission surveys the moon.
In addition to Solar Electric Primary Propulsion, SMART-1 will demonstrate a wide range of new technologies like a Li-Ion modular battery package; new-generation high-data-rate deep space communications in X and Ka bands with the X/Ka-band Telemetry and Telecommand Experiment (KaTE); a computer technique enabling spacecraft to determine their position autonomously in space, which is the first step towards fully autonomous spacecraft navigation.
In April 2005 SMART-1 will begin the second phase of its mission, due to last at least six months and dedicated to the study of the Moon from a near polar orbit. For more than 40 years, the Moon has been visited by automated space probes and by nine manned expeditions, six of which landed on its surface. Nevertheless, much remains to be learnt about our closest neighbour, and SMART-1's payload will conduct observations never performed before in such detail.
The Advanced/Moon Micro-Imaging Experiment (AMIE) miniaturised CCD camera will provide high-resolution and high-sensitivity imagery of the surface, even in poorly lit polar areas. The highly compact SIR infrared spectrometer will map lunar materials and look for water and carbon dioxide ice in permanently shadowed craters. The Demonstration Compact Imaging X-ray Spectrometer (D-CIXS) will provide the first global chemical map of the Moon and the X-ray Solar Monitor (XSM) will perform spectrometric observations of the Sun and provide calibration data to D-CIXS to compensate for solar variability.
The SPEDE experiment used to monitor Solar Electric Primary Propulsion interactions with the environment will also study how the solar wind affects the Moon.
The overall data collected by SMART-1 will provide new inputs for studies of the evolution of the Moon, its chemical composition and its geophysical processes, and also for comparative planetology in general.
Recent Lunar Timelines
- Japanese Hiten, Lunar Flyby and Orbiter
- Michael Rampino and Richard Strothers propose Earth could be periodically struck by comets dislodged from orbits when the solar system passes through galactic plane
- US Dept. Defense/NASA Clementine mission, Lunar Orbiter/Attempted Asteroid Flyby
- First commercial lunar mission, AsiaSat 3/HGS-1 , Lunar Flyby
- Lunar Prospector launches and enters lunar orbit
- Lunar Prospector tries to detect water on the Moon (polar impact)
- Lunar soil samples and computer models by Robin Canup and Erik Asphaug support impact origin of moon
- SMART 1, to launch lunar orbiter and test solar-powered ion drive for deep space missions
- Japanese Lunar-A, Lunar Mapping Orbiter and Penetrator, to fire two bullets 3 meters into the lunar soil near Apollo 12 and 14 sites
- Japanese SELENE Lunar Orbiter and Lander, to probe the origin and evolution of the moon
In addition to valuable lunar science, SMART-1's payload will be involved in the mission's technology demonstrations to prepare for future-generation deep space missions.
For instance, the AMIE camera will be used to validate the On-Board Autonomous Navigation (OBAN) algorithm, which correlates data from sensors and star trackers to provide navigational data. It will also participate in a laser communication link experiment with ESA's optical ground station at the Teide Observatory in Tenerife, Canary Islands, trying to detect an incoming laser beam from the ground.
Using both AMIE and KaTE hardware, the Radio Science Investigation System (RSIS) experiment will demonstrate a new way of gauging the interiors of planets and their moons by detecting the well-known tilting motion of the Moon. This technology can be used later by ESA planetary missions.
SMART-1 was developed for ESA by the Swedish Space Corporation, as prime contractor, with contributions from almost 30 contractors from 11 European countries and the United States. Despite its small size, the spacecraft carries 19 kg of science payload consisting in experiments led by Principal Investigators from Finland, Germany, Italy, Switzerland and the United Kingdom.
Despite its relatively small budget and short development schedule, SMART-1 holds tremendous potential for future missions and is a clear illustration of Europe's ambitions in the exploration of the solar system, also highlighted by June's launch of Mars Express, which has now completed over the half on its journey to Mars, and the launch of Rosetta, due in February 2004, to visit comet Churyumov-Gerasimenko.
Related Web Pages
Impact origin of moon
Review of Theories of Moon-Forming Impact (Planetary Science Institute)