spacer
 
Advanced Search
Astrobiology Magazine Facebook  Astrobiology Magazine Twitter
  
Hot Topic Deep Space New Planets Pulses to Find Planets
 
Pulses to Find Planets
Based on a National Institute of Standards and Technology news release
print PDF
New Planets
Posted:   05/11/08

Summary: A new ultrafast laser could increase the sensitivity of astronomical tools searching for Earth-like planets by as much as 100 fold. The new technology could be a major advancement in the search for habitable extrasolar worlds.
Experimental data from a NIST "gap-toothed" frequency comb that are false colored to indicate the range from low power (red) to high power(blue). The comb is specially designed for astronomy. Each "tooth" is a precisely known frequency, and the teeth are widely separated (by 20 gigahertz) in comparison to a standard comb.
Credit: M. Kirchner & S. Diddams/NIST

Scientists at the University of Konstanz in Germany and the National Institute of Standards and Technology (NIST) have demonstrated an ultrafast laser that offers a record combination of high speed, short pulses and high average power. The same NIST group also has shown that this type of laser, when used as a frequency comb - an ultraprecise technique for measuring different colors of light - could boost the sensitivity of astronomical tools searching for other Earth-like planets as much as 100 fold. The new technology could be a major advancement for astrobiologists searching for habitable worlds beyond our Solar System.

The dime-sized laser, described May 8 at the Conference on Lasers and Electro-Optics, emits 10 billion pulses per second, each lasting about 40 femtoseconds (quadrillionths of a second), with an average power of 650 milliwatts. For comparison, the new laser produces pulses 10 times more often than a standard NIST frequency comb while producing much shorter pulses than other lasers operating at comparable speeds. The new laser is also 100 to 1000 times more powerful than typical high-speed lasers, producing clearer signals in experiments. The laser was built by Albrecht Bartels at the Center for Applied Photonics of the University of Konstanz.

The new laser technology may help astronomers spot Earth-like planets, like the hypothetical world with two moons shown in this artist's concept.
Credit: David A. Aguilar (Harvard-Smithsonian Center for Astrophysics)

Among its applications, the new laser can be used in searches for planets orbiting distant stars. Astronomers look for slight variations in the colors of starlight over time as clues to the presence of a planet orbiting the star. The variations are due to the small wobbles induced in the star's motion as the orbiting planet tugs it back and forth, producing minute shifts in the apparent color (frequency) of the starlight. Currently, astronomers' instruments are calibrated with frequency standards that are limited in spectral coverage and stability. Frequency combs could be more accurate calibration tools, helping to pinpoint even smaller variations in starlight caused by tiny Earth-like planets. Such small planets would cause color shifts equivalent to a star wobble of just a few centimeters per second. Current instruments can detect, at best, a wobble of about 1 meter per second.

Standard frequency combs have "teeth" that are too finely spaced for astronomical instruments to read. The faster laser is one approach to solving this problem. In a separate paper, the NIST group and astronomer Steve Osterman at the University of Colorado at Boulder describe how, by bouncing the light between sets of mirrors a particular distance apart, they can eliminate periodic blocks of teeth to create a gap-toothed comb. This leaves only every 10th or 20th tooth, making an ideal ruler for astronomy.

Most distant planets detected so far have been found by measuring changes in the wavelength of light coming from a star that results from the star orbiting a common center of mass with a companion planet.
Credit: Exoplanets.org

Both approaches have advantages for astronomical planet finding and related applications. The dime-sized laser is very simple in construction and produces powerful and extremely well-defined comb teeth. On the other hand, the filtering approach can cover a broader range of wavelengths. Four or five filtering cavities in parallel would provide a high-precision comb of about 25,000 evenly spaced teeth that spans the visible to near-infrared wavelengths (400 to 1100 nanometers), NIST physicist Scott Diddams says.

Osterman says he is pursuing the possibility of testing such a frequency comb at a ground-based telescope or launching a comb on a satellite or other space mission. Other possible applications of the new laser include remote sensing of gases for medical or atmospheric studies, and on-the-fly precision control of high-speed optical communications to provide greater versatility in data and time transmissions. The application of frequency combs to planet searches is of international interest and involves a number of major institutions such as the Max-Planck Institute for Quantum Optics and Harvard Smithsonian Center for Astrophysics.


Related Web Sites

Astrobiology Roadmap Goal 1: Habitable Planets
Astro-combing for Planets
Catching the Glint of Water
Astronomers Find Habitable Earth-like Planet
Earth-like Planet Found in Leo
The Commonality of Earths
Forecasting Earth-like Worlds
Icy Super Earth Found


About Us
Contact Us
Links
Sitemap
Podcast Rss Feed
Daily News Story RSS Feed
Latest News Story RSS Feed
Learn more about RSS
Chief Editor & Executive Producer: Helen Matsos
Copyright © 2014, Astrobio.net